TIKKURILA BioSeal (Primer for BioRid coating)


PRODUCT
Waterbased and odorless primer. Based on acrylate. Contains a low amount of fungicidal or bactericidal agents.
 
EFFECT
Suitable for the pre-treatment of highly absorbing surfaces and the hardening of sanding and chalking surfaces which will be coated with TIKKURILA BioRid.
 
FIELD OF USE
Mineral plaster (PG I, II and III), plaster board.
 
COVERAGE
Depending on the roughness and porosity of the substrate approx. 100-150 ml/sqm per coat. It is advisable to calculate the coverage of larger areas by prior tests on a smaller area.

APPLICATION
Brushing, spraying (spraying only with low pressure).
 
DRYING TIME
Depending on the porosity of the surface, at 20°C/60% relative humidity re-coatable after approx. 2 hours.
 
COLOR SHADE
Light milky, colorless after drying.
 
COMPOSITION
Water-based.
 
CONTAINER SIZES
1 l, 5 l and 25 l
 

See Technical Data Sheet!

 
THIS COULD BE INTERESTING FOR YOU
TIKKURILA BioWash (Mildew removal agent)
TIKKURILA BioWash (Mildew removal agent)
TIKKURILA BioWash is a colorless and odorless solution with fungicidal, bactericial and algaecide power. It can be used ...
» View product
TIKKURILA BioRid (Anti-mildew coating)
TIKKURILA BioRid (Anti-mildew coating)
TIKKRUILA BioRid is a coating system against condensation and mildew. It is based on a physical effect and absolutly ...
» View product
TIKKURILA GrafoTherm Kondensschutz (Coating against condensation)
TIKKURILA GrafoTherm Kondensschutz (Coating against condensation)
TIKKURILA GrafoTherm Kondensschutz is based on a micro pores coating system. Through these micro pores a phyxical effect is ...
» View product