KULBA Grundveredler Color (Colored primer)


A coat with KULBA Grundveredler Color (coloured primer) protects especially soft wood, e.g. made from spruce and pine, against drying-out, bleaching and defibration caused by UV-rays. Further on it has a preventive effect against damage caused by moisture.
 
Thanks to its qualities KULBA Grundveredler Color (coloured primer) is especially suitable and well-tested for plywood boards which are in permanent contact with concrete. Special oil serves as a barrier between concrete and formwork beam, so the concrete relics can be easily removed. In the building industry especially statically stressed formwork beams are coated with this product.
 
KULBA Grundveredler Color (coloured primer) can further on be used for the coating of scaffold planks. Therefore an effective surface protection against cement dust, concrete and dirt is ensured.
 
PRODUCT
Longtime protection against UV-rays and moisture due to special color pigments. Excellent abrasion resistance due to its great permeability properties. Problem-free wet-in-wet storage of treated boards. Optimally suitable for dip coating as well as for "Vacumat" and "Impregmat". Without biocidal ingredients and solvents, therefore especially environmentally compatible.
 
EFFECT
Wood impregnating concentrate based on acrylate-copolymer.

EFFECT
Wood impregnating concentrate based on acrylate-copolymer.
 
FIELD OF USE
Wooden building units, such as formwork panels and beams, scaffold planks, wood panels, edge sealing, etc.
 
COVERAGE
Depending on the type of wood and woods surface approx. 50-100 ml/sqm of diluted, ready to use solution.
 
DILUTION
Upon request of 1:5 to 1:9 with water.
 
APPLICATION
Brushing, rolling, spraying, dipping, application by Vacumat and Impregmat.
 
DRYING TIME
Depending on the porosity of the surface, at 20°C/60% relative humidity stackable after approx. 15 minutes.
 
COLOR SHADE
Standard color: yellow RAL 1021 and traffic red RAL 3020.
By request every color shade can be mixed at a minimum order of 120 liters.
 
COMPOSITION
Acrylic acid hydrosol copolymer dispersion.
 
CONTAINER SIZES
30 l cans and 1,000 IBC container. Min. purchase 120 l/color shade.

 
See Technical Data Sheet!

Header-picture: PERI GmbH, Weißenhorn